FOSTA
Showing 1–25 of 82 results
-
P 1018 – Characterization and modeling of the influence of softened zones around spot welds on the behavior of high strength and press hard-ened steel components under crash loading
50,00€ zzgl. MwSt -
P 1040 – New application possibilities for rear-ventilated metal facades with the use of stain-less steel composite sheets
30,00€ zzgl. MwSt -
P 1209 – Fatigue failure of runway beams due to wheel loads in heavy smeltery cranes
30,00€ zzgl. MwSt -
P 1094 – Data and prediction based generation of model parameters for mechanical joints under crash loads
40,00€ zzgl. MwSt -
P 978 – Holistic Assessment of Steel and Composite Railway Bridges according to Criteria of Sustainability
50,00€ zzgl. MwSt -
P 950 – Strain-based design criteria for unfired pres-sure vessels: Demonstration of an adopted DBF procedure
30,00€ zzgl. MwSt -
P 1091 – Development of a concept to assess the loss of preload in preloaded bolted connections under fatigue loading
70,00€ zzgl. MwSt -
P 1019 – Derivation of new, optimized strength criteria for steel components
30,00€ zzgl. MwSt -
P 1086 – Numerical modeling and parameter identification for failure behaviour of hyperelastic adhesive bonds
50,00€ zzgl. MwSt -
P 834- Assessment of bolted connections in steel and composite buildings as basis for the design of fire safe structures
46,00€ zzgl. MwSt -
P 939 – Simulation of humping effects and undercuts in consideration of the temperature-dependent density in the molten pool
20,00€ zzgl. MwSt -
P 1065 – Integrated temperature measurement tool for press hardening
20,00€ zzgl. MwSt -
P 1080 – Enhancement of material and processing spectrum in wind energy plant construction by applying consistent safety assessment and weld technology optimization
40,00€ zzgl. MwSt -
P 920 – The use of new steels and generation of graded lightweight structures in press hardening process
30,00€ zzgl. MwSt -
P 1072 – Formability improvement of shear cut surfaces of iron-manganese sheet metal by optimized cutting parameters
40,00€ zzgl. MwSt -
P 923 – Disposition of wear protection layers with a thickness of up to 5 mm made of metal-ceramic powder mixture via resistance welding
30,00€ zzgl. MwSt -
P 992 – Optimized calculation of the unfolded length in bending sheet metal to profiles and tubes
30,00€ zzgl. MwSt -
P 991 – Development of a method for investigation of hot crack resistance of laser welded joints
30,00€ zzgl. MwSt -
P 977 – Developing a high quality sandwich-panel envelope-system for office and multi-storey buildings including innovative assembly technologies
65,00€ zzgl. MwSt -
P 942 – Increase of the wear resistance of hot forging tools by utilization of the cyclical edgezone hardening
30,00€ zzgl. MwSt -
P 972 – FEA-assisted optimisation of blanking aimed at damage minimisation at cut edges of dual-phase and complex-phase steel sheets
30,00€ zzgl. MwSt -
P 948 – Internal Flow-Turning – An inovative process for the manufacture of semifinished steel products for lightweight design with avarying wall thickness and mechanical properties
30,00€ zzgl. MwSt -
P 922 – Influence of the weld thermal cycle on residual stress evolution and cold cracking resistance in welded high-strength fine-grained structural steel constructions
30,00€ zzgl. MwSt -
P 905 – Investigations on fusion welding of stainless chromium steels with martensitic microstructure by laser and MAG welding
30,00€ zzgl. MwSt -
P 938 – Influence of high frequency hammer peening on the fatigue strength of welded notch details of ultra high strength steels with steel grades S960, S1100 and S1300
40,00€ zzgl. MwSt
Showing 1–25 of 82 results